5) To Power ON, press and hold the Power Button for three (3) seconds.
Caps/Scroll/Num Lock will flash twice and Power Indicator will illuminate.
6) To Power OFF, press and hold the Power Button for three (3) seconds.
7) To Pair Bluetooth, power the keyboard on then press and hold the Bluetooth Button until BT
Link Indicators begin to flash rapidly. Keyboard is now in search mode. BT Link will become
solid once a connection is made and will disappear after 30 seconds. NOTE: A slow flashing BT
Link indicates the keyboard is attempting to repair the last Bluetooth connected host
computer.
8) To switch from Bluetooth to USB, when the Power Cable is connected the Keyboard will
automatically switch to USB mode. The Charge indicator will illuminate while the Keyboard is
plugged in and charging.
9) To switch from USB to Bluetooth, once the Power Cable is removed the Keyboard will attempt
to re-pair to the last Bluetooth connected host computer. NOTE: Plugging the Keyboard in via
USB will not establish a Bluetooth connection. The Bluetooth menu on the host computer
must be used to establish a Bluetooth connection.
10) To enable or disable the 10-key number pad, press “NumLk” key
11) To enter or exit “Clean Mode” press Fn+C. The Scroll Lock indicator will flash to indicate this
mode is active. While in clean mode the Keyboard functions are disabled allowing the user to
physically clean the Keyboard. To clean, use a soft cloth and a non-corrosive cleaning solvent.
Do not use a stiff brush and no intense scrubbing.
Installation and Operation
(continued)
+
