background image

www.havis.com   •   1-800-524-9900

DS-GTC-701

DS-GTC-701-2

DS-GTC-703

DS-GTC-703-2

DS-GTC-704

DS-GTC-704-2

DS-GTC-705

DS-GTC-705-2

DS-GTC-706

DS-GTC-706-2

Before Beginning

(Original Instructions)

2

11

Havis is pleased to provide this Owner’s Manual to aid in the proper

installation and use of the DS-GTC-700 Series Docking Station for

the Getac Z710 & ZX70 Rugged Tablets.
For questions regarding the set-up of your DS-GTC-700 Series Docking Station, 

please contact Havis at 1-800-524-9900 or visit www.havis.com for additional 

product support and information.

This Owner’s Manual applies to the following Part Numbers:

• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE

   AIRBAG DEPLOYMENT ZONE.
• DO NOT USE COMPUTER WHILE DRIVING. 

• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.
• DO NOT STORE, INSTALL, OR OPERATE THE DOCKING STATION WHERE WATER, MOISTURE, 

   STEAM, DUST, ETC. ARE PRESENT
• DO NOT DOCK OR UNDOCK YOUR COMPUTER UNLESS IT IS POWERED OFF.  DOCKING OR 

   UNDOCKING WITH YOUR COMPUTER IN ON, STANDBY, HIBERNATION, OR SLEEP MODES

   CAN CAUSE PERMANENT DAMAGE.
• A PROPER VEHICLE POWER CONNECTION IS ESSENTIAL TO PREVENT DAMAGE TO THE 

   DOCK AND/OR TABLET.  Please refer below to the proper power connection:

   - DS-GTC-701, DS-GTC-701-2, DS-GTC-704, DS-GTC-704-2, DS-GTC-705, DS-GTC-705-2 –  

      These docking stations may be connected directly to the vehicle power source using the

      included fused input power cable.

   - DS-GTC-703, DS-GTC-703-2, DS-GTC-706, DS-GTC-706-2 – These connect directly to the 

      tablet and require a certified, automotive grade, Getac approved 55W power source rated 

      for a continuous, regulated 12VDC output (Havis Part Number LPS-139 or equivalent).

      DO NOT CONNECT VEHICLE POWER DIRECTLY TO THE TABLET.  Failure to comply with these 

      requirements will cause damage to the tablet.

• FOR DOCKING STATION MODELS EQUIPPED WITH A BUNDLED POWER SUPPLY

   

(DS-GTC-706, DS-GTC-706-2)

, REFER TO THE SUPPLIED GETAC POWER SUPPLY REFERENCE GUIDE.

• WHEN TABLET IS DOCKED, THE BATTERY WILL ONLY CHARGE BETWEEN

   0°C to 50°C (32°F to 122°F).  
   PLEASE REFER TO GETAC Z710/ZX70 OWNER’S MANUAL FOR MORE INFORMATION.

Related Products

Havis offers a wide variety of accessory products specifically for use 

with the DS-GTC-700 Series Docking Station.  For more information or 

to order, please visit www.havis.com.

LPS-139

55W Power Supply

External in-vehicle power supply and cable for Getac

Z710/ZX70 Rugged Tablets with cigarette lighter adaptor.

DS-DA-218

Desktop Stand for Tablet Docking Stations

Durable stand for mounting tablet Docking Stations

for use in the home or office.

DS-DA-503

Replacement Keys

Set of two (2) replacement keys for DS-GTC-700

Series Docking Stations.

DS-DA-801

Screen Blanking Solution

Powered by Blank-it, USB dongle manages In-vehicle
computer displays and prevents driver distraction.

Содержание DS-GTC-701













Отзывы: