Before Beginning
Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the
DS-GTC-1300 Series Docking Station for the Getac ZX10 Fully Rugged Tablet.
For questions regarding the set-up of your DS-GTC-1300 Series Docking Station,
please contact Havis at 1-800-524-9900 or visit www.havis.com for additional product support and information.
This Owner’s Manual applies to the following Part Numbers:
DS-GTC-1301
DS-GTC-1301-3
DS-GTC-1302
DS-GTC-1302-3
DS-GTC-1303
DS-GTC-1303-3
DS-GTC-1306
DS-GTC-1306-3
•
NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE AIRBAG DEPLOYMENT ZONE.
•
DO NOT USE COMPUTER WHILE DRIVING.
•
READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.
•
DO NOT STORE, INSTALL, OR OPERATE THE DOCKING STATION WHERE WATER, MOISTURE, STEAM, DUST, ETC.
ARE PRESENT
•
DOCKING OR UNDOCKING YOUR COMPUTER WHILE IN ON, STANDBY, HIBERNATION, OR SLEEP MODE CAN CAUSE
SOME DEVICES TO NOT INITIALIZE PROPERLY. IF THIS OCCURS, PLEASE TURN OFF YOUR COMPUTER AND RESTART
IT WHILE IT IS DOCKED.
•
FOR THE DS-GTC-1301, DS-GTC-1301-3, DS-GTC-1302, DS-GTC-1302-3 DOCKING STATIONS: DO NOT CONNECT
DIRECTLY TO VEHICLE VOLTAGE SOURCE: This product requires a certified, automotive grade, Getac approved
120W power source rated for a continuous, regulated 19VDC output (Havis Part Number LPS-140 or equivalent).
Failure to comply with this requirement will cause product damage that is NOT repairable and is NOT covered
under warranty.
•
FOR THE DS-GTC-1303 & DS-GTC-1303-3 DOCKING STATIONS: DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE
SOURCE: The Getac ZX10 Fully Rugged Tablet requires a certified, Getac approved power source rated for a
continuous, regulated 19VDC output. Failure to comply with this requirement will cause product damage that is
NOT repairable and is NOT covered under warranty.
•
WHEN TABLET IS DOCKED, THE BATTERY WILL ONLY CHARGE BETWEEN 0°C to 50°C (32°F to 122°F).
PLEASE REFER TO GETAC ZX10 OWNER’S MANUAL FOR MORE INFORMATION.
Precautions
•
Do not place metal objects or containers of liquid on top of the Docking Station
•
If a malfunction occurs, immediately unplug the Power Supply and remove the laptop
•
Use only the specified Power Supply (Part # LPS-140) with this Docking Station
•
Do not connect cables into ports other than what they are specified for
•
Do not leave the Docking Station in a high temperature environment (greater than 85°C, 185°F) for a long period of time
