2. Install all of the cables that are necessary for your computing needs. Use zip ties (Hardware Kit Item 1)
to strain relieve cables to strain relief points, routing all cables together so they can be attached to the
mounting system
Cable Management
Use as many zip
ties as necessary
to secure cables
Zip tie cables onto
mounting device as
shown. Leave additional
slack to allow motion
device to move freely
without stressing cables.
Create a service loop if
there is excess cable
3. Create a service loop with cable bundle to ensure no tension is on the connectors and to enable
intended motion.
4. Tie off cables onto a stationary part of the mounting system
(Mounting system not included with the docking station)
