Havis C-DMM-3003, Инструкция по установке

Страница: 4 / 5

C‐DMM‐3003_INST_7‐18
Carefully remove (unsnap) center trim bezel around touch
screen and climate controls
Remove three (3) screws from the vent housing and remove
the housing. Repeat for passenger side. (7mm socket)
Remove two (2) screws on each side next to the OEM screen.
Install side support brackets using OEM hardware.
Loosely place the center trim bezel up to the
dash and mark the plastic area around the upper
side brackets to be notched.
Carefully notch trim bezel accordingly and reinstall back
into dash. Re ‐ install all vents and dash trim.
File or Dremel tool works well for notching plastic.
On the 2017 and older Tahoe, (2) plastic tabs will need to be
trimmed. This can be done with a simple snip from a pair of
diagonal cut pliers
OEM Trim Bezel
P/N: 22883557