C-DMM-2007_INST_1-17
Attach the main mount bracket to the dash using
10-32 machine screws and washers.
Re-assemble dash at this time
Connect harnesses to the back of the TSD-101 display.
It is important to also double wire tie the harnesses to provide
sturdy strain relief for the plugs.
USB connection from remote Docking station must plug
into USB plug closest to front of display.
Attach pivot / display mount bracket to display with M4 x
0.7 x 10mm Phillips head machine screws, lock washers
and flat washers. Display mount hardware is included
with TSD-101 hardware kit
Attach bracket with display to the tilt swivel hinge
with M8 hex nut and lock washer. Tighten nut and
attach vinyl cap on M8 bolt threads.
Refer to TSD-101 owner’s manual for
power and computer connection details.
Installation of C-DMM-2007 with TSD-101
complete.
Recommended location for
hole for wire harness run.
