WGI-D22-INST-10-06
Mounting holes. Drill 1/8” holes.
Mount using #10 x ½” screws
INSTALL WINDOW GUARDS
•
Loosely attach upper mounting bracket to window guard using ¼” x ½” tamper proof
screws and flat washers.
•
Position screen to vehicle as shown in
photo #2
.
•
Make sure you have the window guard centered on the door.
•
Mark, drill 1/8” holes, and attach lower mount using #10 x ½” screws as shown in
photo
#3
.
Note: Be sure the upper mounting brackets go under weather stripping and the notches go
around the mounting plugs.
Make sure the mounting holes will have metal material to drill into.
•
Press firmly against window guard and mark door where the upper mounting brackets are
located
•
Drill 5/32” holes and mount to door using #10 x ¾” sheet metal screws.
Photo #3
Press firmly against guard until
bracket is under weather stripping.
Mark and drill 5/32” holes
Photo #2
Mount upper bracket using #10 x ¾” screws