background image

 

INSTALL INSTRUCTIONS P-MID-1 w/P-MFK-5 

MIDDLE PARTITION w/MOUNTING FILLER PANEL KIT 

1997-2008 CHEVROLET/GMC FULL SIZE PASSENGER VANS 

 

TOOLS REQUIRED: 

 Power 

drill 

 

Drill bit set 

Ratcheting wrench 
Standard & Metric socket set 

 

HARDWARE: 
QTY DESCRIPTION PART 

¼” x 1 ½” Hex head Lag Bolt 

GSM33062 

¼” x 1” Hex head Lag Bolt 

GSM33060 

20 

¼-20 x ¾” Carriage Bolt  

GSM32000 

12 

¼-20 Serrated Nut 

GSM30023 

¼-20 Nylock Nut 

GSM30016 

5/16-18 Nylock Nut 

GSM30017 

5/16-18 x 2” Hex Head Bolt 

GSM33015 

5/16 Flat Washer 

GSM31006 

¼” x 1” Fender Washer 

GSM31014 

 

 

Main Partition 

Frame 

Driver Side Upper 
Lexan Filler Panel 

Upper Center Steel 

Filler Panel 

Driver Side Lower 

Steel Filler Panel 

Passenger Side Steel 

Door Filler Panel  

Passenger Side     

Mounting Bracket 

(2-Piece) Driver Side 

“B” Pillar Mounting 

Bracket 

Содержание P-MFK-5

Страница 1: ...6 x 1 Hex head Lag Bolt GSM33060 20 20 x Carriage Bolt GSM32000 12 20 Serrated Nut GSM30023 8 20 Nylock Nut GSM30016 1 5 16 18 Nylock Nut GSM30017 1 5 16 18 x 2 Hex Head Bolt GSM33015 2 5 16 Flat Washer GSM31006 8 x 1 Fender Washer GSM31014 Main Partition Frame Driver Side Upper Lexan Filler Panel Upper Center Steel Filler Panel Driver Side Lower Steel Filler Panel Passenger Side Steel Door Filler...

Страница 2: ...wn on floor of van Pre drill the 3 driver side mounting leg holes with 3 16 drill bit Be sure to check for obstructions Attach partition to van floor at driver side mounting leg using 3 x 1 Hex head lag bolts Proceed to partitions passenger side mounting leg Be sure to check that partition is square with the bench seat Pre drill the 2 passenger side mounting leg holes with 3 16 drill bit Be sure t...

Страница 3: ...et Slot headliner and position mounting bracket to be flush with vehicle inner roof support Mark 3 mounting holes and pre drill using 3 16 drill bit Attach bracket to vehicle using 3 x 1 Hex head lag bolts Press partition up to bracket and mark holes where bracket and partition come together Drill 5 16 holes on these marks and bolt partition to bracket using 5 16 18 x 2 Hex head bolt washer and ny...

Страница 4: ...age bolts and nylock nuts 6 ATTACH DRIVER SIDE LOWER STEEL FILLER PANEL Position driver side lower aluminum filler panel tight to vehicles interior trim and floor Using slots in filler panel as a drill guide mark and drill partition using 5 16 drill bit Attach filler panel to partition using 20 x carriage bolts and serrated nuts 7 ATTACH PASSENGER SIDE DOOR STEEL FILLER PANEL Position on front row...

Отзывы: