INSTALLATION INSTRUCTIONS KK-K9-F12-K
2000-2006 FORD EXCURSION
TOOLS REQUIRED:
Power Drill
Standard & Metric Socket Sets
Phillips Screw Driver
7/16” Wrench
Wire Cutters / Crimping tool
Ratchet Wrench With 6” Extension
Torx Bit Set
4 ½” Hole Saw (Exhaust Fan Option)
Caulk Gun
HARDWARE:
Some of this hardware is already attached.
QTY: DESCRIPTION: PART
#:
28
¼-20 X ½” Stainless carriage bolts
GSM 32022
30
¼-20 X ¾” Stainless carriage bolts
GSM 32024
64
¼-20 Serrated nuts
GSM 30023
6
¼-20 X ¾” Hex head Cap Screw Zinc
GSM33001
14
¼” X 1 ½” Hex head lag screw
GSM 33062
36
#12 X ¾” Stainless sheet metal screws
GSM 34177
24
#10 X ¾” Stainless sheet metal screws
GSM 34170
22
#10 X ½” Stainless sheet metal screws
GSM 34169
6
#10 X ¾” Sheet metal screws
GSM 33195
20
#10 X ½” Sheet metal screws
GSM33194
1
Tube Silver Caulk
PRM 97343
1
46” X 45 1/2” Rubber Mat
KNM01029-SUV
11 1/2 feet Adhesive Molding
SUB ASSEMBLY:
•
Dome light with wire
•
Tunnel edge molding
•
Install exhaust fans (Optional). If locating in custom
location drill 4 ½” hole into desired location of K-9
housing. Mark and drill 3/16” mounting holes to
attach fan using (4) 10/32” X ½” machine screws and
10/32” keps nuts. Then mark and drill 3/16” holes to
mount fan guard using 10/32” X ½” machine screws
and 10/32” keps nuts.
INSTALLATION:
1. Remove interior:
•
Remove rear seats
•
Remove rear seat belt assembly
•
Remove top, and bottom plastic rear trim caps