C-TCB-9-INST-7-05
SUB ASSEMBLY:
1.
Confirm receipt of all hardware and components.
2.
Remove front inner and outer passenger seat bolts on vehicle.
INSTALLATION:
1. Mount C-TCB-9 into vehicle:
•
Position pole support assembly between seat base mount and floor of vehicle
•
Align holes in pole support assembly with holes in seat base.
•
Loosely attached factory seat bolts that were removed during subassembly.
•
Mount side support brace to threaded rod located on pole support assembly using a
5/16-18 Nylock nut
•
Mount side support brace to vehicle using ¼” x ¾” Hex head lag bolts. A 3/16” pilot
is required.
Note: When mounting side support brace to floor of vehicle, be sure to check for obstructions prior to
drilling or lag bolting to floor.
•
Tighten down passenger side factory seat bolts and 5/16-18 nylock nut holding side
support brace to pole support assembly.
•
Mount optional C-3090, computer-mounting platform, to telescoping pole assembly
using hardware and instructions provided with C-3090.
