background image

 

Dome Light KR-DL 

Installation Instructions 

 

 

Warning:  Please read all instructions and warnings prior to installation of the Dome Light.

    

 
TOOLS REQUIRED: 

 

 

Phillips Screw Driver 

 

 

Wire Cutter

HARDWARE:  (Supplied in Kit) 

 

Qty. Description Qty. Description 

#8-32 Machine Screw 

#8 Fender Washer 

#8 KEP Nut 

#8 Sheet Metal Screw   

 

INSTALLATION: 

 

1. Mounting:  

 

• 

A drill template is provided on the back of this instruction sheet.  Detach the 
template, position it on the desired location for installation, and mark drill locations. 

 

Caution:

  Before drilling holes, ensure that the mounting surfaces are clear and that the 

screws will not damage the internal parts of the vehicle. 

 

Caution:

  Ensure that the Dome Light is installed in areas recommended by the vehicle 

manufacturer. 

 

• 

Drill the mounting holes.   

• 

Connect the power leads using wire splices. 

• 

Remove the template prior to installing the fixture.  Secure the base of the fixture in 
position using the supplied machine screws, washers, and nuts. 

 

Caution:

  Thread forming screws are supplied for alternate installations.  If the fixture needs to 

be mounted with thread forming screws, please note that it may not always be sufficiently 

secured.  It is at the sole discretion of the installer to determine the suitability of using thread-
forming screws for a particular installation.

 

 

• 

The fixture is supplied with two clear lenses and two red lenses.  Install two lenses 
suitable for the vehicle. 

• 

Test the fixture for proper operation.

Отзывы: