Havis-Shields C-VS-1000-TAH Скачать руководство пользователя страница 2

 

C-VS-1000-TAH-INST-1-07 

 

View of factory full-length console 

with C-VS-1000-TAH 

#1 

Remove factory cup holder/accessory 

pocket from console 

#2

CAREFULLY separate trim bezel 

from dashboard 

#3

If your console is not equipped with 

adjustable pedal, tow package, and power 

brake switches proceed to step #13 

Note: 

Содержание C-VS-1000-TAH

Страница 1: ...ndard Wrench Set Power drill w 1 8 drill bit optional Screwdriver set T 20 torx bit HARDWARE QTY DESCRIPTION PART 1 OEM switch bracket CM001800 3 4 20 Serrated nut GSM30023 2 20 x Hex bolt GSM33001 2 10 x Sheet metal screw GSM33195 1 Torx screw hardware kit C HK 1 OEM switch bracket CM001800 3 Switch cutout filler plate CM001800 4 Supplied lighter plugs C VS 1000 TAH ...

Страница 2: ...th console with C VS 1000 TAH 1 Remove factory cup holder accessory pocket from console 2 CAREFULLY separate trim bezel from dashboard 3 If your console is not equipped with adjustable pedal tow package and power brake switches proceed to step 13 Note ...

Страница 3: ...anel on dashboard 6 5 4 Unplug switch and set aside for later install Remove factory switch box from trim panel Using a small flat head screwdriver unclip fastener 7 9 8 Install switch box into C VS 1000 TAH if necessary View of factory console at this time Attach switch box to console using T 20 torx screws Do not over tighten screws This will cause the switches to stick in the ON position 12 11 ...

Страница 4: ...s and attach using Serrated nuts Re attach factory plug into switch box Be sure plug is secure and wires are carefully routed so not to chafe 18 17 16 Route all wiring to console Wire and install control heads and accessories Sold separately Attach middle of VS console to factory console using x Hex bolts and serrated nuts For added support 10 x screws can be installed on front side of console 19 ...

Отзывы: