C-VS-1800-ECO_INST_9-07
INSTALL INSTRUCTIONS C-VS-1800-ECO
2004-2008 FORD ECONOLINE VAN
TOOLS REQUIRED:
3/8” Standard Socket Set
3/8” Metric Socket Set
3/8” Ratcheting Wrench
Powered drill w/ drill bit set
Open-end wrench set
Screw driver set
HARDWARE & COMPONENTS:
QTY DESCRIPTION PART
#
6
¼-20 Nylock nut
GSM30016
4
¼” Flat washer
GSM31005
2
¼-20 x ¾” Carriage bolt
GSM32000
4
¼-20 x 1 ¼” Hex head bolt
GSM33003
4
#10 x 1” Phillips sheet metal screw
GSM33196
1
Torx Screw Hardware Kit
C-HK-1
Always
!
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
INSTALL C-VS-1800-ECO:
1.
Remove O.E.M. engine cover accessory package (cup holder/storage pocket).
2.
Place new console housing with mount brackets against engine cover and
floor. Mark engine cover and drill four (4) - 5/16” diameter holes. Mark
outline of floor bracket.
Also remove
washers from studs
