EN
40
TOD
Advanced function 3: Daylight saving time
If this function is activated, thermostat change automatically
time (summer/winter) according to date.
Advanced function 4: Calibration of temperature sensor.
The calibration must be done after 1 day of operation.
•
Put a thermometer in the room at the same distance
from the floor as the thermostat. Check the real
temperature in the room after 1 hour.
•
Enter this value in the calibration parameter menu by
using the
or
. Press
button to confirm.
Advanced function 5: Antifreeze set point temperature.
The minimum temperature you can set is 5ºC and the
maximum is 10ºC.
Advanced function 6: Intelligent Temperature Control
System (adaptive start heating in AUTO mode).
This system activates the start-up of the appliance
prior to the programmed time to ensure that the desired
temperature is achieved at the indicated time. This feature
is factory activated.
C
Advanced function 7: Automatic open window
detection.
You can activate / deactivate this function. This feature is
factory activated.
Advanced function 8: Heater power.
IMPORTANT: Do not change this value as it will affect the
Power Consumption Indicator.
3. OPERATION
