HAVERLAND UK LIMITED
Challenge House, Sherwood Drive
Bletchley, MK3 6DP
Tel: 0030 3651940
– Fax: 01672 811944
15/11/2020
If you wish to go backwards to the previous hour, please press the
DOWN
arrow, but please note that if
you wish to save the changes made you will need to press
UP
arrow and go forward until you reach the
last hour of the day.
Repeat the process above for the rest of the hours / days. Every time you finish a period you will see
“End” on the display, please press
OK
to confirm and use the
UP/DOWN
to move to the next period. In
case you chose ALL, you will not need to move to the next period.
To exit the temperature menu please press
.
Once you finish your schedule, please select the programming mode (AUTO) by pressing the
button
until AUTO is displayed.
5. MANUAL MODE
To select the manual mode please press the
OK
button until the HAND icon is displayed on the right-
hand side. To choose your desired temperature on the Manual mode please press the
UP/DOWN
arrows. Depending on the temperature selected the background light will be red, yellow or green.
Please note that the Manual mode temperature is independent from the Comfort/Economy/Antifreeze
temperatures selected on the programming mode.
6. OFF MODE
If you want to turn off the radiator, please press the
OK
button until OFF is displayed on the right-hand
side. The unit will not heat up regardless the temperature of the room and it will remain OFF until you
select a different mode again.
7. TEMPERATURE SETTING
This allows you to adjust the ambient temperature measured by the radiator. This calibration
compensates for a difference between the temperature obtained in the room by an external thermostat
and the temperature programmed in the radiator.
To access it, the radiator must be first on the AUTO setting, therefore, press the button until you see
“AUTO” on the top left corner of the display.
Now press and hold
, 4 horizontal lines will appear, and number 1 will be displayed on the right-hand
corner. Use the UP or DOWN buttons until
4
is on the right-hand corner (The room temperature will be
displayed), press OK and use the UP or DOWN to set the temperature accordingly to your external
thermostat and press OK to confirm.
To exit the temperature menu please press
.
