Follow the link at the end of this guide to access the full manual online.
Manual includes full installation and programming instructions, warranty details, safety
guidance and advanced settings.
https://www.electricradiatorsdirect.co.uk/media/pdf/RC-Wave-Manual-
202
0
INSTALLATION
SET DAY & TIME
SETTING A PROGRAM
•
Fix firmly to a solid and levelled wall.
•
Check socket is within reaching distance.
•
Unit must not be mounted within 15cm of any object - including adjacent walls.
•
DO NOT COVER
•
NOT FOR USE IN BATHROOMS
•
SEE MANUAL FOR FULL SAFETY DETAILS
!
SAFETY
INITIAL SETUP
To reach clock screen, Press
until
you see the frost screen:
Hold down for 5 seconds.
Press once more.
Use and to set the weekday. Press .
Use and to set the hours. Press .
Use and to set the minutes. Press .
CHOOSING A MODE
Press to toggle between frost and heating modes.
Frost:
On frost, the radiator will only heat
if the temperature drops below
7 °C. This is the mode to use if
you’re going away and want a minimal level
of heat to prevent your pipes freezing.
Press to toggle between the 3 heating modes:
Economy is always at least 3 degrees lower
than comfort.
On program mode the radiator heats as per
your set program, using the temperatures
you set for comfort and economy.
Comfort and Economy are constant heat modes.
Use and to set the temperature.
Heating Modes:
Comfort
Economy
Program
KEYPAD LOCK
If the keypad is not responding, it may be
locked.
Hold down and for 3 seconds to
lock or unlock.
Press until you see the frost screen.
Hold down for 5 seconds.
Programs are set by assigning a heating mode
(comfort, economy or frost) to each hour of each
day of the week.
The program starts at midnight on Monday.
Use to choose the mode for this hour:
comfort, economy or frost.
Repeat this process for every hour of every day of
the week.
If you make a mistake, you can’t go backwards, but it’s
easy to start over and skip back to where you were. Your
programming so far will be saved.
Press twice.
Hold down for 5 seconds.
Use to skip back to where you were.
When the program is set, the controller will move
to the time setting screen. Follow the steps above
to set or press to skip.
You can then move to the next hour using the
or buttons:
Moves to the next hour without making
changes
Use this if the next hour will be a different mode
Copies the current mode to the next hour
Use this if the next hour will be the same mode
day of the week
time
frost
frost
economy
comfort
comfort
economy
BABY CARE FUNCTION
- OPTIONAL
Hold down
and
to activate baby care function. BABY CARE and ON will
flash on the keypad. Repeat to de-activate. BABY CARE and OFF will display.
When baby care is activated, the radiator will operate at approximately half the
wattage, keeping the surface at a lower temperature. Be aware that the radiator
will heat up slower and may be less effective at getting rooms to temperature
when this mode is engaged.
Plug in
to a 13 Amp
socket.
