7
HAVEN Lockdown
KEY FOB PAIRING
(purchased separately)
H
LED Status Indicator
I
Unlock Button
J
Lock Button
1
Touch the key fob against the HAVEN
Connect
Status Indicator LED
( A )
and press
and
hold
the key fob un
lock button
( I )
until
the Key Fob
LED Status Indicator
( H )
illuminates and blinks white. Continue
holding button
( I )
.
2
3
Both lights should blink together and you will hear a beep to signify that the pairing was
successful.
4
If you do not hear the beep and your key fob does not function or flashes red, you will need to
hold
the
HAVEN Admin Button
( B )
for about 10 seconds to
reset
(LED will flash green) and then
start the process over again. (
Note:
resetting the HAVEN through manual reset also disconnects any
synced phone applications that will need to be re-keyed via the mobile application).
KEY FOB RESET
When a HAVEN Key Fob needs to be cleared of its paired connection to HAVEN
Connect
, it must go
through a reset process.
1
Hold Lock Button for 5 Seconds
- On the enrolled key fob, hold down the unlock button
( I )
for approximately 5 seconds.
2
Wait for Flashes
- A short series of flashes will appear, momentarily stop and then reappear.
3
Fob Restarts
- The fob will then automatically restart. Upon powering back up, an alternating
series of green, red, blue and white flashes indicate that the fob is powered on.
4
Ready for New Enrollment
- The key fob has been successfully reset and the preexisting
enrollment has been cleared.
Need help? Contact us at [email protected]
While still holding the
key fob unlock button
,
press and
release
the
HAVEN Admin Button
( B )
and when it starts
blinking
white,
release the unlock button
( I )
on the key
fob.
