REGULATORY INFORMATION
Use caution when installing HAVEN on a doorway during installation and use.
Owner is responsible for reading and following the operating and safety instructions as well as proper use of the lock.
Wear appropriate protective items during installation to avoid injury.
Do not install near live electrical cords. Ensure installation area is free of wires, cables, pipes, and other objects that may
cause hazards.
Use only the tools referenced in the installation guide. Use of other tools or not following installation instructions may
result in improper installation and decreased functionality.
Owner is responsible for proper use and avoidance of HAVEN as a bump hazard.
Install HAVEN Lockdown on solid core, commercial doors only. Installation on hollow core doors will severely degrade
the lock’s capabilities and void the warranty.
Owner is responsible for ensuring the unit is clean for full functionality and capabilities.
CAUTION
CAUTION
Owner is responsible for providing access to the building or commercial facility. Owner is responsible for ensuring
alternate access into the building when needed.
Owner is responsible for maintaining control of permissions, access control, and accountability of any key fob or
credentialed device that has been shared with the lock.
The unit is designed to act as a deterrent, but should still be used in conjunction with other safety measures. The
unit is intended as supplementary security for use in conjunction with current lock hardware.
HavenLock Inc is not liable for any personal injuries, property damage, economic loss or any consequential damages
sustained as a result of any individual that comes into contact with the lock or attempts to breach it.
Do not consume any area of the unit.
Do not put the unit near sensitive bodily areas.
Do not place fingers near the center locking gate or bracketing hardware while the lock is being used. Severe injury
to fingers could result from getting caught between the locking gate and bracket.
NOTICE
To avoid damage to the unit, do not use on wet surfaces or damp locations. The product is designed for indoor use only.
Do not expose to weather elements as this may affect functionality.
To avoid potential damage to your unit, do not simulate a breach. Damage to the unit may affect later functionality.
Owner is responsible for ensuring unit is operating properly. HavenLock Inc expressly disclaims all guarantees, whether
implied or expressed, to include but not limited to fitness or merchantability for a particular purpose.
QUICK START GUIDE
2
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
WARNING: Changes or modifications which are not expressly approved by HavenLock Inc could void the user’s authority to operate the
equipment.
AVERTISSEMENT: Les changements ou modifications qui ne sont pas approuvés par HavenLock Inc pourrait annuler l'autorité de l'utilisateur
de faire fonctionner l'équipement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions:
1) This device may not cause interference.
2) This device must accept any interference, including interference that may cause undesired operation of the device.
Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences et Développement
économique Canada. Le fonctionnement est soumis aux deux conditions suivantes:
1) Cet appareil ne doit pas causer d'interférences.
2) Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement indésirable de
l'appareil.
This system has been evaluated for RF Exposure per RSS-102 and is in compliance with the limits specified by Health Canada Safety Code 6.
The system must be installed at a minimum separation distance from the antenna to a general bystander of xx inches (xx cm) to maintain
compliance with the General Population limits.
L’exposition aux radiofréquences de ce système a été évaluée selon la norme RSS-102 et est jugée conforme aux limites établies par le Code
de sécurité 6 de Santé Canada. Le système doit être installé à une distance minimale de xx pouces (xx cm) séparant l’antenne d’une
personne présente en conformité avec les limites permises d’exposition du grand public
20 Minute - 45 Minute Rating
Test Standard: UL 10C, NFPA 252, CAN/ULC
S104
Guardian Fire Testing Laboratories Inc
