Sliding Door Bracket Installation Instructions
Installation Instructions for Inside Track Doors
Tools Needed
●
3/32“ drill bit
●
Drill driver with Phillips head bit
●
Pencil or marker
●
(2) 3M VHB Tape (included)
Installation
1)
Locate the position for the install of the sliding door bracket on the bottom of the sliding
glass door frame (the slider, not the fixed door). Make sure bracket is positioned so that
it will catch on the Haven Lock gate when the Haven is in the locked position. Once
proper position has been determined, mark your pilot holes on the door frame.
2)
Using a 3/32“ drill bit, drill your pilot holes for your screws. Don’t apply too much
pressure as you don’t want to drill through the opposite side of the frame.
3)
Attach (1) of the included 3M tape pieces to the back of the bracket (side to be screwed
into the door) for extra strength.
Page 1 | © HavenLock, Inc. 2019
