LIMITED WARRANTY
See www.havahartwireless.com for Limited Warranty information.
Rev. 1111
For more information go to: www.havahartwireless.com or call 1-800-800-1819,
option 1.
behavior and creating desired positive behavior.
REMOTE TRAINER AND COLLAR TESTING
Use the heart-shaped test light supplied with your collar to ensure that the collar
is delivering a static stimulus. Before each training session, place the holes in the
heart-shaped light firmly against the probes on the collar, making sure that the
wires in the light are touching the probes. Press the Correction button on the
trainer -- the light on the heart will flash to indicate that the collar and remote
trainer are working properly.
TROUBLESHOOTING
We are committed to assisting you with the use of our products. If you have any
questions or concerns, contact Woodstream Customer Care at 1-800-800-1819,
option 1.
• If it appears the collar is not working, test it with the test light.
(See “Remote Trainer and Collar Testing”)
• If test light works but it appears to not be delivering a correction to your pet,
check the fit of the collar and length of the probes. (see “Fitting the Collar”) The
probes need to be in contact with the pet’s skin to deliver the static stimulation.
• If test light does not work, check the batteries. If the battery level on the collar
is low, the collar LED will blink red every 3 seconds. If the battery level on the
remote trainer is low, a “b” will blink once every 10 seconds. If the batteries need
to be replaced, you can find disposable CR2 and CR2450 lithium batteries at
most electronics stores.
• If the test light still does not work, be sure the remote trainer switch is on the
correct collar setting for the collar (Collar 1 or Collar 2). If it still is not working,
repeat syncing procedure for the collar and remote trainer. (see “Linking the
Collar and Remote Trainer”)
6
7
