HP_ESC2_QSG_GF2100111RevA21
2
1.770.368.4700
Information contained herein is subject to change.
The most current and complete product information can be
found on our website:
www.grahamfield.com / www.hausted.com
© 2021, GF Health Products, Inc. All Rights Reserved.
Hausted is a trademark of GF Health Products, Inc.,
One Graham-Field Way, Atlanta, GA 30340-3140, U.S.A.
GF Health Products, Inc. is an ISO 13485:2016 / MDSAP
Certified Company.
CHAIR HEIGHT UP
CHAIR HEIGHT
DOWN
Press and hold HEIGHT
button to raise or lower
chair height.
BACK UP
BACK DOWN
Press and hold BACK
button to raise or lower
back section.
SEAT TILT UP
SEAT TILT DOWN
Press and hold
SEAT TILT button to
raise or lower seat tilt.
LEG UP
LEG DOWN
Press and hold LEG
button to raise or lower
leg section.
MEMORY AND PRESET FUNCTIONS
MEMORY
Position chair to desired position. Enter MEMORY MODE by pressing and holding MEMORY
button for three seconds until LED flashes. Once MEMORY LED flashes, simultaneously press
and hold MEMORY button and desired PRESET button (1, 2, or 3) until beeping stops (MEMORY
LED will stop flashing and go out and PRESET LED will illuminate). Once MEMORY button and
PRESET button are released, the position saves, LEDs go out, and MEMORY MODE exits. (After
entering MEMORY MODE, PRESET buttons that illuminate are already programmed, but can be
overwritten; PRESET buttons that don’t illuminate are not yet programmed.)
PRESET 1
Press and hold PRESET 1 button until saved pre-programmed position is achieved. LED
illuminates steady green while pressed, goes out when released.
PRESET 2
Press and hold PRESET 2 button until saved pre-programmed position is achieved. LED
illuminates steady green while pressed, goes out when released.
PRESET 3
Press and hold PRESET 3 button until saved pre-programmed position is achieved. LED
illuminates steady green while pressed, goes out when released.
IMPORTANT: PLUG CHAIR INTO POWER OUTLET EVERY NIGHT WHEN NOT IN USE.
