
2-1
Unpacking Instructions
Operator Manual
076204
UNPACKING INSTRUCTIONS
2
IMPORTANT:
Report any shipping damage immediately! Inform shipper of
any damages – leave carton intact. Leave the stretcher in the receiving area
until inspection is complete.
Your Hausted
®
Horizon Series Model 468XRY – X-Ray Trauma Stretcher has
been carefully packaged at our manufacturing plant to ensure safe shipment to
you medical facility. There are several procedures you must follow to put your
new stretcher into service. These procedures only take a few minutes to
complete and are required to ensure proper operation of the stretcher.
Step 1
– Cut the two bands around the shipping carton.
Step 2
– Remove the top half of the carton and cut one side of the bottom half.
Step 3
– Remove the stretcher from the carton. Cut the bands from around the
stretcher.
Step 4
– Check to see if all features of the stretcher work properly. If all features
work properly, go to step 5. If any of the features of the stretcher do
not work properly, call STERIS for service.
Step 5
– Clean the stretcher using a mild detergent to remove any dirt
accumulated during shipment.
Step 6
– Place the unit into service.
WARNING – LACERATION
HAZARD: When cutting
bands always use a tool spe-
cifically designed for that
purpose. This will help to
avoid personal injuries fre-
quently incurred when
bands are cut and tension
released.
Содержание 468XRY
Страница 1: ...OPERATING MANUAL Hausted Horizon Series Model 468XRY X Ray Trauma Stretcher 08 30 06 076204 ...
Страница 26: ...7 1 Recommended Replacement Parts Operator Manual 076204 7 RECOMMENDED REPLACEMENT PARTS ...
Страница 29: ...7 4 076204 Operator Manual Recommended Replacement Parts Figure 4 2 10 9 4 9 8 5 7 10 2 8 3 6 1 ...
Страница 31: ...7 6 076204 Operator Manual Recommended Replacement Parts Figure 4 3 2 4 6 5 1 3 ...