18
ACCESSORIES
WARRANTY
CAUTION!
!
CAUTION!
!
Tips for maintaining maximum battery life
1) Charge the battery pack before it is completely
discharged.
Always stop tool operation and charge the battery pack
when you notice a decrease in tool power.
2) Never recharge a fully charged battery pack. Over-
charging shortens the battery service life.
3) Charge the battery pack with room temperature at
10
0
C-40
0
C (50
0
F-104
0
F) and let a hot battery pack
cool down before charging it.
4) Charge the Nickel-cadmium battery pack when you
do not use it for more than six months.
Thank you for investing in a HAUSSMANN power tool.
These products have been made to demanding,
high-quality standards and are guaranteed for domestic
use against manufacturing faults for a period of 36
months from the date of purchase.
This guarantee does not affect your statutory rights. In
case of any malfunction of your tool (failure, missing part,
etc.), please contact one of our service technician at our
toll free service line at 1-866-206-0888 Ext 2 from 8 AM
to 6 PM, Monday to Friday, Eastern time. RONA reserves
the right to repair or replace the defective tool, at its
discretion.
Normal wear and tear, including accessory wear, is not
covered under guarantee. The product is guaranteed for
36 months if used for normal trade purposes. Any guarantee
is invalid if the product has been overloaded or subject to
neglect, improper use or an attempted repair other than
by an authorized agent. Heavy-duty, daily professional
or hire usage are not guaranteed. Due to continuous
product improvement, we reserve the right to change the
product specification without prior notice.
If you tighten the screw for a time longer than shown in
the figures, the screw or the point of the driver bit may be
overstressed, stripped, damaged, etc. Before starting your
job, always perform a test operation to determine the
proper fastening time for your screw.
The fastening torque is affected by a wide variety of factors
including the following. After fastening, always check the
torque with a torque wrench.
1. When the battery pack is discharged almost
completely, voltage will drop and the fastening torque
will be reduced.
2. Failure to use the correct size driver bit or socket bit
will cause a reduction in the fastening torque.
3. Even though the torque coefficient and the class of
bolt are the same, the proper fastening torque will
differ according to the diameter of bolt. Even though
the diameters of bolts are the same, the proper
fastening torque will differ according to the torque
coefficient, the class of bolt and the bolt length.
4. The torque may be affected by the material to fasten,
or the position in which the tool is held.
5. Operating the tool at low speed will cause a reduction
in the fastening torque.
These accessories or attachments are recommended for
use with your tool specified in this manual. The use of
any other accessories or attachments might present a risk
of injury to persons. Only use accessory or attachment for
its stated purpose.
1) Place the reversing switch lever (3) into the middle
position before carrying out any tasks on the tool,
e.g. changing bits or maintenance, or before
transporting or storing
If you need any assistance for more details regarding
these accessories, please contact the Customer service
line at 1-866-206-0888.
Screw bits
Plastic carrying case
Cleaning and Maintenance
ENGLISH
Содержание 59595058
Страница 2: ...2 ...
