3
GB
HAMMOCK WITH FRAME
62657
DIRECTIONS FOR USE AND SAFETY INSTRUCTIONS
General notes
·
Read the instructions carefully before use.
·
Keep these instructions for future reference and include
these instructions if you pass on the product to third par-
ties.
·
Use the product only for the intended use. Any other use
as well as modifications of the product have to be consi
-
dered as improper use and could cause injuries or product
damages. The manufacturer will not be held responsible
for any damages resulting from such improper use.
·
Not for commercial use.
Safety notes
⚠
WARNING
Life and accident risk for toddlers and kids! To
avoid danger of suffocation, keep packing ma-
terials away from babies and children. Risk of
suffocation due to packing material. Small parts
can be swallowed! Children often underestimate
the dangers!
⚠
CAUTION
Always check the hammock material on material
alterations or damages before use. Do not use the
hammock if it is damaged.
·
The hammock should only be built up by adults (Details
see “MOUNTING”).
·
Please ensure that children may only use the hammock
under supervision of a qualified person.
·
Do not use the hammock as a swing or gymnastic appa-
ratus! Little swaying or swinging is okay.
·
Never jump into the hammock or sit down jerky.
·
Use the hammock preferably on shock-absorbing grounds
like carpets or grass. This will lower the risk of injuries. As
precaution you can also use a mat (e.g. a mattress) below
the hammock.
·
Do not place any objects under the hammock.
·
Before each use make sure the hammock is fixed ade
-
quately.
·
Suitable for adults and young people aged 12 years or
older!
·
Do not exceed the maximum load. Overloading may cause
permanent damage to you hammock. Risk of injuries!
·
Max. 1 person / weight capacity max. 150 kg.
·
Regularly check your hammock for signs of wear and tight
fit of all connections.
Parts list
Mounting
1.
Place center bar (3) on a flat surface.
2. Slip the rubber four leg caps (7) onto each end of the two
side legs (5).
3. On each end of the center bar, insert the side legs (5) to
raise the center bar slightly off the flat surface. Secure
with grip screws (1) at each end of the hammock, under
the center bar where center bar meets the legs.
4. Insert hammock support poles (4) into the inserts
from the legs slanted up. Secure with grip screws (1)
at each end of the hammock, where the hammock sup-
ports meet the legs.
5. Screw the hammock hooks (2) into each of the hammock
support poles (4), with the hooks on the outside of the
assembly facing down as pictured.
6. Place the end topes of one end of the hammock bed (6)