4.7.4.
Use of the torch.
a. Press the switch to switch-off the light. If you forget to do so, it will be automatically switched
off after 15 minutes.
b. The direction of the light can be regulated within the range of support positions 1 to 5.
Battery duration:
• Manganese batteries AAAA: approx 15 hours
• Alkaline batteries: AAAA: approx 30 hours
CAUTION:
Do not look at the light directly. This could damage your eyesight.
c. Replacing the batteries
• Loosen the support screw with a Phillips screwdriver (Nº 1).
• Remove the support cover, by pushing it in the direction of the arrow.
d. Remove the used batteries and insert new ones. Align them with the hook indications and position them
correctly with the positive (+) and negative (-) terminals. Ensure that the indent on the main support body
coincides with the cover tab. Press the cover in the opposite direction to the arrow shown in the previous
figure and tighten the screw.
Note:
Do not tighten the screws excessively, as this could damage the screw threads.
CAUTION:
• Failure to observe the following precautions could cause electrolyte leaks, oxidation or malfunctioning. Correctly position
the positive (+) and negative (-) terminals. Always change both batteries at the same time. Do not mix used and new
batteries. Dead batteries should be removed from the torch immediately.
• Do not scrap the batteries with normal waste and do not throw them in the fire.
• Keep batteries out of the reach of children.
• Use the batteries correctly, according to the instructions and specifications provided with the batteries.
8
