Germany: HAUPA GmbH & Co. KG, Königstraße 165-169, D - 42853 Remscheid.
Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840, [email protected] • Errors and technical changes reserved.
… convincing solutions
english
2.
Select the appropriate tool for the connector to be compressed.
3.
Put the workpiece on the knife edge of the tool correctly. After pressing „Power on“ button, the tool will
cut automatically. If the pressure reaches 700kg/cm
2
, the speed cut off speed will be turned into
low-speed.
4.
Take out the workpiece in pressing the “Power on” button. Keep loose the „Power on“ button, then
press the „Power off“ button.
5.
Working finish, loose the „Power on“ button, then press the „Power off“ button, remove the workpiece
from the tool.
Adapter for headstock
Power on/off
Power on/off
Adapter for headstock