Haulotte HA12CJ Скачать руководство пользователя страница 13

Страница: 13 / 106

4000827180

E 09.18

USA / GB

HA12CJ - HA32CJ - -

- Foreword

Using a machine on a slope

• If the tilt alarm sounds with the platform uphill : First lower the boom and then retract the

boom.

• If the tilt alarm sounds with the platform facing downhill : First retract the boom and then

lower the boom.

• While driving, always place the boom above the rear axle, in the direction of movement.

• While driving on a slope:

• Always orientate the machine in the direction of the slope.

• Always place the boom and the arms in fully retracted and in stowed position.

• Do not travel down slopes in high speed.

• Do not drive fast in narrow or cluttered areas. Keep speed under control while making turns or sharp bends.

Do not exceed the slope limit for each operation. Section B 4.1Technical

specifications.

Gradeability :

• Driving UP or DOWN a slope in stowed position.

Rated slope :

• Operating with platform elevated.

Содержание HA12CJ











































































































Результаты поиска

Содержание HA12CJ

Отзывы:

Бренды по названию

Популярные бренды

Haulotte HA12CJ, Руководство оператора

Результаты поиска

Содержание HA12CJ

Отзывы:

Бренды по названию

Популярные бренды