Page 4
For technical questions, please call 1-888-866-5797.
Item 97214
Assembly
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Fasten the Quick Hitch to the tractor’s lift
arms using a Bracket with Clevis Pin on each
end. Secure with R-Pins.
See Figure A.
Top
Hook
Implement
Tractor’s
Lift Arms
Tractor’s
Top Link
Lower
Hooks
Bracket with
Clevis Pin
Top
Bracket
Figure A
2. Fasten the tractor’s top link to the Top
Bracket with the Top Link Pin (8).
3. Adjust the height of the Top Hook and connect it
to the implement with a link pin (not included).
4. Insert the implement’s lower mounts inside the Lower
Hooks, and lock by pressing down the latch handles.
5. Check that all connections are tight
before starting the work task.
6. If the tractor has stabilizer arms, they will not fit
into the Quick Hitch mounting area along with
the lift arms. Use stabilizer chains, or some
other longer mounting pin (neither included)
to fasten the Quick Hitch to the tractor.
Mounting Non-ASAE Implements
Note:
If the implement does not meet
ASAE specifications, use Hitch Adapter
(29309, sold separately).
1. Remove the Top Hook by taking out
the two Hex Bolts (2), Lock Washers
(6), and Nut (7). Save hardware.
2. Slide the Hitch Adapter over the Top
Bracket and secure with Top Link Pin.
3. For most implements, the front hole
(closest to implement) is recommended
for the best vertical alignment.
4. Attach the implement to the Hitch Adapter
with a Link Pin (sold separately).
5. Check that all connections are
tight before starting a task.
Top Link
Pin
Implement
Quick Hitch
Tractor Top Link
(sold separately)
Hitch Adapter
(sold separaetly)
Link Pin
(sold separately)
Top Bracket