background image

Page 3

For technical questions, please call 1-800-444-3353.

Lever Chain Hoist

2. 

Personal safety

a. 

Stay alert, watch what you are doing 

and use common sense when using 

a tool.  Do not use tools while you are 

tired or under the influence of drugs, 

alcohol or medication.

  A moment of 

inattention while operating a tool may 

result in serious personal injury.

b. 

Use personal protective equipment.  

Always wear eye protection.

  Wear 

hard hat. Safety equipment such as dust 

mask, non-skid safety shoes, hard hat, or 

hearing protection used for appropriate 

conditions will reduce personal injuries.

c. 

Dress properly.  Do not wear loose 

clothing or jewelry.  Keep your hair, 

clothing and gloves away from moving 

parts.

  Loose clothes, jewelry or long 

hair can be caught in moving parts.

d. 

Only use safety equipment 

that has been approved by an 

appropriate standards agency.  

Unapproved safety equipment may 

not provide adequate protection.  

Eye protection must be ANSI-approved.

3. 

Tool use and care

a. 

Store idle tools out of the reach 

of children and do not allow 

persons unfamiliar with this 

tool or these instructions to 

operate the tool.  

Tools are dangerous 

in the hands of untrained users.

b. 

Inspect before every use.  Check for:

•  damaged, worn, or deformed/

stretched chain links or hook,

•  damaged, disabled, or missing 

safety latch,

•  misalignment or binding 

of moving parts,

•  breakage of parts, and

•  any other condition that may 

affect the tool’s operation.

If damaged, have the tool repaired 

before use.

  Many accidents are 

caused by poorly maintained tools.

c.  Do not lift, lower, pull anything 

beyond rated capacity. 

Be aware of dynamic loading!

  

Sudden load movement may briefly create 

excess load causing product failure. 

Do not jostle or twist a suspended load, 

move item to the work area, lower and 

release the Hoist before beginning work.

d.  Do not use the Hoist to lift 

a person or animal.

e.  Do not work underneath a suspended load.
f.  Maintain labels and nameplates 

on the tool.  These carry important 

safety information.  If unreadable 

or missing, contact Harbor Freight 

Tools for a replacement.

g.  This product is not a toy.  

Keep it out of reach of children.

h.  Do not lubricate the braking system.
i.  Do not operate with twisted chain.
j.  Do not use handle extension to 

increase force on the handle.

k.  Do not insert bolt between chain 

links to ‘splice’ chain.

l.  Do not use a hammer to force 

hook/chain into place.

m. Do not attach hook tip onto chain.
n.  Attach hook completely around 

attachment point and make sure 

the safety latch closes properly, 

as shown in Figure A, right.

Figure A:  Incorrect and 

Correct Hook Attachment

o.  Do not turn the Brake Knob 

(if equipped) to lower a load.

p.  Do not leave load suspended when 

unattended.  Load brake is intended 

to support load only temporarily.

q.  Lift load slightly off ground and stop 

to test load brake before each lift.

Содержание 66106













Отзывы: