Item 65115
For technical questions, please call 1-888-866-5797.
Page 3
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
ASSEMBLY AND MOUNTING
INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at the
beginning of this document including
all text under subheadings therein
before set up or use of this product.
Mounting
1.
Align the Winch on the vehicle mounting
frame (not supplied). Use a marker (not
included) to make drill marks though the
mounting holes at the front of the Winch and
through the mounting slot and the back of
Winch.
2.
WARNING!
The Winch should be aligned
and secured to a solid and flat part of the
vehicle that is able to withstand the weight of
Winch and the 1,200 lb. max. load capacity
for 65115 Winch and the 2,000 lb. max. load
capacity for 98923 Winch.
3.
Remove Winch and drill three 5/16” holes for
the mounting of the front part of frame. See
Figure 1
, above.
4.
Drill 5/16” holes for the mounting slot at the
rear part of frame. See
Figure 2
, above.
5.
Using the proper hardware, secure Winch to
vehicle mounting frame.
Assembly
1.
Use the Screw and Locking Nut to attach
Crank Handle to hexagonal head of Gear
Pinion.
2.
Use the Hex Wrench to tighten the Screw
and Locking Nut until Crank Handle is
secured in place. See
Figure 3
, below.
Figure 2
Mounting Hole
Mounting Holes
Fig. 1
Hex Wrench
Screw
Crank
Handle (10)
Figure 3