Page 7
For technical questions, please call 1-800-444-3353.
Item 60708
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Mounting The Trailer to the Towing Vehicle
1. Before mounting, chock the trailer wheels
to prevent the trailer from rolling.
2.
If using the Jack with electric power:
a. If wired to the vehicle battery, plug the Jack wire
into the quick connect. If wired to the trailer’s
electrical system, turn on the ON/OFF switch.
b. If needed, turn on the lights using
the Light Switch.
Note:
The lights will only work when
the Jack wiring is powered.
c. Check that the Power Switch Cover (26)
is secured over the Power Switch (23).
d. Pull the Power Switch away from the Jack to raise
the trailer to the level of the towing vehicle’s hitch.
Release the Power Switch to stop the Jack.
CAUTION:
Release the Power Switch when the
motor slows, or switches off, to prevent damage
to the motor. Wait 15 seconds for the motor
to reset before operating the Jack again.
3.
If using the Jack manually:
a. Disconnect power to the Jack.
b. Remove the Level Gauge (24) on the top of
the Jack to access the Drive Collar (11).
c. Insert the Crank (30) onto the Drive Collar.
d. Rotate the Crank counterclockwise to raise the
trailer to the level of the towing vehicle’s hitch.
4. With the assistance of a spotter,
back the vehicle to the trailer.
5. Mount the trailer onto the towing vehicle’s hitch.
6. Push the Power Switch toward the Jack
(electric) or turn the Crank clockwise (manual)
to retract the Jack slightly, lowering the trailer and
transferring its weight onto the towing vehicle.
7. Once trailer is fully engaged, continue to
retract Jack up to the “STOP” label on the
Inner Tube (2A). Trailer Jack must always
be fully retracted when towing the trailer.
8. Attach the safety chain (sold separately).
Dismounting The Trailer from the Towing Vehicle
1. Before dismounting, chock the trailer wheels
to prevent the trailer from rolling.
2.
If using the Jack with electric power:
a. If wired to the vehicle battery, plug the Jack wire
into the quick connect. If wired to the trailer’s
electrical system, turn on the ON/OFF switch.
b. If needed, turn on the lights using
the Light Switch.
Note:
The lights will only work when
the Jack wiring is powered.
c. Check that the Power Switch Cover (26)
is secured over the Power Switch (23).
d. To extend the Jack and raise the trailer,
pull the Power Switch away from the Jack.
Release the Power Switch to stop the Jack.
3.
If using the Jack manually:
a. Disconnect power to the Jack.
b. Remove the Level Gauge (24) on the top of
the Jack to access the Drive Collar (11).
c. Insert the Crank (30) onto the Drive Collar.
d. Rotate the Crank counterclockwise to
extend the Jack and raise the trailer.
4. Continue to extend just enough for the Trailer
Jack to take the weight of the trailer. This will
make it easier to disengage the trailer hitch.
5. Disengage the electrical connections, the
trailer hitch, and any safety chains or other
connections between the vehicle and the trailer.
6. You may need to extend the Jack further
to clear the trailer hitch. When the vehicle
is completely clear, and it is safe to do so,
drive the vehicle away from the trailer.
CAUTION:
Have a spotter watch this operation
to be sure the trailer is clear of the vehicle.
7. When finished raising or lowering the trailer:
a. If using with electric power,
disconnect power to the Jack.
b. If using the Jack manually, remove the
Crank and replace the Level Gauge. Store
the Crank in a safe place for future use.
SAFETY
OPERA
TION
MAINTENANCE
INST
ALLA
TION
Содержание 60708
Страница 1: ......
