Haug Static Control Digital, Руководство по эксплуатации

Страница: 13 / 20

7 Measuring
13
Carrying out a measurement
1. Hold the SCD vertically with its two spacer
pins against a grounded surface.
2. Press and hold the start button. The SCD
will calibrate itself and show a value of
"000" on the display.
Fig. 8
3. Now approach the surface to be measured
with the SCD, until the spacer pins come to
rest vertically.
Fig. 9
4. Release the Start button. The measuring
value will now be saved.
5. Remove the SCD from the surface
measured.
6. Read the measured value on the display.
NOTE:
The measuring value will be displayed for
about 15 s (hold function). The SCD will then
switch off automatically.