22
Art. Nr.: 5090032102
Rev.: 00/2017-11-30
KES-M ZVR-FUBO-FIX
EN
2
Push the spiral hose into the connecting sleeve as far as
it will go and tighten the tension strap using the torque
wrench
(see table 2)
(see fi g.: 5).
Fig.: 6
Fig.: 5
3
For further installation of the two KES systems, insert the
centring wedges provided in the groove of the moulding
strip (see fi g.: 6).
NOTE!
Incorrect assembly!
Improper installation can result in damage.
• If the spiral hose is shortened, the cutting surface
has to be right-angled, clean and free of burrs..
Type
Spannersize
SW
max� tightening
torque
KES-System 90
13
5 Nm
KES-System 110
13
10 Nm
KES-System 150
13
10 Nm
Table 2
Fig.: 4
Install the connecting sleeve on the uncoated side of the
cement composite wall sleeve and tighten the tension
strap using the torque wrench
(see table 1)
(see fi g.: 4).
Type
Spannersize
SW
max� tightening
torque
KES-System 90
13
5 Nm
KES-System 110
13
10 Nm
KES-System 150
13
10 Nm
Table 1
