Hauck SHOP'N DRIVE, Инструкции

Страница: 3 / 5

S
S
H
H
O
O
P
P
’
’
N
N
D
D
R
R
I
I
V
V
E
E
1. ADJUSTING THE PLASTIC-BRACKETS:
Put the brackets on the plastic-sideparts of the stroller as shown and fix them by pushing
them over the extended plastic-nose inside the stroller. Make sure the brackets sitting tight
and assembled correctly.
2. ASSEMBLY OF THE CARSEAT:
Put the carseat into the u-shaped part of the brackets and fix them by pushing the carseat
firmly down. The hooks at the left and right side fix the carseat and hold it tight.
3. TAKE-OFF THE CARSEAT:
Push the hooks at left and right side backwards until they are locked. Now you can take-off
the carseat.
4. TAKE-OFF THE PLASTIC-BRACKETS:
Release the brackets by pulling them over the extended nose located at the inside of the
stroller.
WARNING:
For safety-reason do not install the Lifesaver-Carseat to the stroller while the Baby is sitting inside
the carseat. Also take-off the Carseat without Baby inside.
Store the carseat brackets properly while it is unused. In case damage is found on the brackets,
stop using it and contact our Hauck local office or distributor.
Only our Hauck VIPER – stroller can be matched with our Hauck Lifesaver-Carseat, or vice versa.
Do not try to use different brand of carseat on our Viper Stroller or use different brand of stroller for
our Lifesaver-Carseat.
Always secure the child with safety harness seatbelt on the Lifesaver-Carseat.
Always ensure the Lifesaver-Carseat is securely installed on the stroller during use.
GB