Hauck DRYK DUO, Инструкция по эксплуатации

Страница: 32 / 184

- GB 12 -
3
. USA
GE AS BIKE TRAILER
3.1. FITTING THE CLUTCH HEAD TO THE WHEEL
2
Undo the rear axle of your bicycle
and pull it out. Please also take note
of the user manual of your bike.
Then slide the clutch head [I] on the
axle.
REMOVE REAR AXLE
3
Tighten the rear axle again. Make
sure that the system is completely
closed and that the axle cannot
come loose.
If you use the bike trailer frequent-
ly, you can leave the clutch head
attached to the axle. This makes
it easier to attach and detach the
trailer.
FIX CLUTCH HEAD
1
Press down the safety bracket [G]
at the front end of the drawbar. By
folding the handle away, you can pull
out the safety pin
[H] .
Then release the clutch head [I] from
the drawbar.
REMOVE CLUTCH HEAD
H
I
I
G