Hatz 2L41C страница 48 Скачать руководство пользователя

Страница: 48 / 113

Operation and use

2L41C, 2M41, 2M41Z

HATZ

Operator’s Manual

7.7

Refueling

This diesel engine is intended for installation in a machine or for assembly
with other machines to form a machine and does not have its own fuel tank.
Follow the instructions from the manufacturer and comply with the following
safety information.

Safety notes

DANGER

Fire hazard from fuel.

Leaked or spilled fuel can ignite on hot engine parts and cause
serious burn injuries.

▪

Only refuel when the engine is switched off.

▪

Never refuel in the vicinity of open flames or sparks that can
cause ignition.

▪

Do not smoke.

▪

Do not spill fuel.

CAUTION

Danger of environmental damage from spilled fuel.

Do not overfill the fuel tank and do not spill fuel.

▪

Collect any leaking fuel and dispose of it according to local
environmental regulations.

CAUTION

Engine damage from using low quality fuel.

The use of fuel that does not meet the specifications can lead to
engine damage.

▪

Only use the fuel specified in chapter

4.5 Fuel, page 25

▪

The use of fuel that does not meet specifications requires
approval by Motorenfabrik HATZ (main plant).

Содержание 2L41C


















































































































Результаты поиска

Содержание 2L41C

Отзывы:

Похожие инструкции для 2L41C

Бренды по названию

Популярные бренды

Hatz 2L41C, Руководство пользователя

Результаты поиска

Содержание 2L41C

Отзывы:

Похожие инструкции для 2L41C

Бренды по названию

Популярные бренды