Hatz 2G40 Скачать руководство пользователя страница 73

Страница: 73 / 94

2G40, 2G40 H

Faults

HATZ

Operator’s Manual

For low temperatures (engine does not start)

Possible causes

Remedy

Chapter

Temperature below
start limit temperature.

Activate the pre glow system
(option).

7.4 Starting the
engine, page 36

Pre glow system (op-
tion) defective.

Contact Hatz Service.

Fuel gelled due to in-
sufficient cold resis-
tance.

Check whether the fuel that
emerges from the fuel feed line
is clear and not cloudy. If the
fuel has gelled, either thaw the
engine or drain the entire fuel
supply system. Fill with a tem-
perature-resistant fuel mixture.

4.5 Fuel, page 23

8.2.10 Changing
the fuel filter,
page 67

Oil is too viscous and
causes a too low
starter speed.

Change the engine oil.
Add engine oil with a suitable
viscosity class.

8.2.5 Change the
engine oil and oil
filter, page 56

Insufficiently charged
battery.

Check the battery and contact
the service center if necessary.

3.2.4 Electrical
equipment, page
18

Machine is not uncou-
pled.

If possible, separate the engine
from the machine by uncou-
pling it.

The starter does not switch on and the engine does not turn.

Possible causes

Remedy

Chapter

Irregularities in the electrical equipment:

Battery and/or other
cable connections are
incorrectly connected.

Check the electrical equipment
and its components or contact
Hatz service.

3.2.4 Electrical
equipment, page
18

Cable connections are
loose and/or oxidized.

Battery is faulty and/or
not loaded.

Faulty starter.

Faulty relay, monitor-
ing elements, etc.

Содержание 2G40































































































Результаты поиска

Содержание 2G40

Отзывы:

Похожие инструкции для 2G40

Бренды по названию

Популярные бренды

Hatz 2G40, Руководство оператора

Результаты поиска

Содержание 2G40

Отзывы:

Похожие инструкции для 2G40

Бренды по названию

Популярные бренды