5.4.2. Dry-type air cleaner maintenance
It is best to clean the filter cartridge only when
the maintenance indicator displays the appropri-
ate signal. This is only the case if the mainte-
nance indicator functions properly (chap. 6.1.).
Apart from this, the cartridge should be renewed
after 500 hours of operation.
31
– Take off rain cap „1“ and clean it.
– Slacken off wingnut „2“ and remove cover „3“
with dust discharge valve „4“.
– Examine the cover and dust discharge valve
for distortion, aging and cracks; renew if
necessary.
– Unscrew and remove collar nut „5“.
– Carefully pull out filter element „6“.
– The cartridge may no longer be used if there is
damage to the filter „6“ or in the area of the lip
seal „7“.
– Pull guide „8“ out of filter housing „9“.
– Clean all parts except the filter element.
Do not spray into the engine air intake.
Cleaning the filter cartridge
Dry contamination
32
– Using a compressed-air pistol with a bent tube
insert, blow through the cartridge from the in-
side with dry compressed air, moving up and
down, until no more dust is emitted.
Important !
The pressure must not exceed max. 5 bar.
Wet or oily contamination
Replace the filter cartridge.
– Assembly is carried out in reverse order.
Check the seal insert of collar nut „5“, replace
the collar nut if the seal insert is missing. Ensure
that the dust extractor valve is correctly posi-
tioned downwards (fig. 31).
– When the filter has been installed, unlock
maintenance indicator „3“ – if installed – by
pressing reset button „4“ (fig. 33).
22
