ABOUT THE TENSION
ADJUSTMENT BOLT
ABOUT THE PROTECTOR
(Not applicable to HB320A)
3
HOW TO USE
Adjust the tension adjustment bolt for
the ice block holder not to descend
when you remove a supporting hand
from the crank handle. Otherwise, injury
could occur. Adjusting the bolt adjusts
the power used to hold the ice.
CAUTION
Use a slotted screwdriver.
・
Turn the bolt clockwise for stronger tension of
gripping ice or counterclockwise for weaker.
・
Confirm the adjustment by turning the crank
handle. Recommended tension is such that the ice
block holder does not descend when you remove
a supporting hand from the holder, yet it doesn't
feel heavy or tight when the handle is moved to
lift the holder.
・
When the motor is overloaded, the protector causes
the machine to stop automatically.
・
A protector is installed in the motor.
・
Follow the instructions below when the protector is
activated (the red button pops out).
(1)Turn the unit off and unplug it.
(2)Remove the cause of the overload (e.g., the blade
catches the ice too deeply and prevents rotation
of the ice). Reposition the ice.
(3)The protector stops the unit when excessively high
temperatures are detected. Operation should be
restarted once the motor cools down (about 1
hour).
Note : Contact the distributor or an authorized
20℃
Shaving Table
Blade
The ice melts and
it catches the blade too deeply