Form No. GRCMWHIM-0907
5
INSTALLATION
ASSEMBLY
Position unit upright on the counter near the location
it will be used. Installation of the following items is
required before operating the unit:
• Qty. 2 - Side Glass Panel (P/N 04.40.289.00)
• Qty. 1 - Back Mirror Glass Panel
• Qty. 1 - Pan Skirt (P/N
)
• Qty. 1 - Polycarbonate Breath Protector
(P/N 04.12.325.00)
NOTE: Decorative Corian
®
pieces are not supplied
or installed by Hatco.
Installing Back Mirror Glass Panel (See Figure 5)
1. Position the mirror glass panel with the mirror
side of the glass facing the inside of the unit.
2. Very carefully guide and lower the mirror glass
panel into the brackets located on the back of the
unit.
Installing Side Glass Panel (See Figure 6)
1. Position the side glass with the curved edge
facing the front of the unit.
2. Lift and tilt the top of the side glass up into the
upper bracket, and carefully lower the bottom of
the side glass into the lower bracket.
3. Repeat steps 1-2 for installing the other side
glass panel.
Figure 5. Installing Back Mirror Glass Panel
M i r r o r
S i d e
Rear
Bracket
Figure 6. Installing Side Glass Panel
