Hatco Flav-R-Savor WFST Series, Инструкция по установке и эксплуатации

Страница: 12 / 16

OPTIONS AND ACCESSORIES
Form No. WFSTm-0612
12
4” (102 mm) Adjustable Legs
The 4″ (102 mm) adjustable legs are used to add additional
height to the unit and are available as accessories. Use the
following procedure to install legs.
1. Remove the display rack and secure all glass sides and
doors with tape. Carefully lay the unit on its side.
NOTICE
:
Do not lay unit on side with control panel.
2. Screw the 4″ (102 mm) legs into
the holes in the middle of each
corner bracket. after all the legs
are tightened, return the unit to its
upright position. If the unit is not
level or rocks, turn the adjustable
tip of the appropriate leg to level
the unit.
NOTE: 4″ (102 mm) legs are adjustable for leveling the unit.
Use a 5/8″ (16 mm) open-end wrench to make leveling
adjustments once the unit is placed in final position.
Stacking Kit
a stacking kit is available as an accessory in black or gray.
Stacking kits are used for stacking one WFST unit on top of
another to maximize floor space. Stacking kits include a base
frame, four 6” (152 mm) adjustable stainless steel legs, and two
stacking brackets.
Use the following procedure to stack two WFST units. This
procedure requires at least two people:
1. Install the four 6” (152 mm) stainless steel legs into the
bottom of the base frame. If the base frame is not level or
rocks, turn the adjustable tip of the appropriate leg to level
the base frame.
2. Carefully position the lower WFST unit into the base frame
assembly.
3. Remove the cover screws from the top cover of the lower
WFST unit.
4. Position one stacking bracket on each side of the top cover
on the lower WFST unit, aligning the holes on the brackets
with the cover screw holes. Secure the brackets using the
cover screws.
5. Carefully lift the upper WFST unit onto the lower WFST unit
and position it inside the stacking brackets.
Self-Closing Sliding Doors
Self-closing sliding doors are available as a factory-installed
options.
NOTE: Self-closing sliding doors are available for one side only
on WFST-2X models.
Self-Closing French Doors
Self-closing French doors are available as a factory-installed
option.
Lengthen
Shorten
Adjustable Tip
Merchandising Decal
Self-adhesive merchandising decals are available to promote
food products. The decals are designed to be installed on three
(3) sides of the cabinet above the glass panels. merchandising
decals display text reading “Today’s Hot Specials” or a graphic
featuring chicken or ribs.
Decal Installation
1. Clean the side panels with a non-oily cleaner, such as
isopropyl alcohol (rubbing alcohol).
2. after the cleaned surfaces have dried, remove the
protective backing from the decal and apply to the panel.
3. Remove any air pockets or bubbles behind the decal by
rubbing gently with a soft cloth from the center towards the
outer edges.
Display Sign Holder
a Display Sign Holder can be installed on the front of the unit.
Use the following procedure to install a Display Sign Holder.
ELECTRIC SHOCK HAzARD: Turn the power switch OFF,
unplug the power cord, and allow the unit to cool before
performing any maintenance or cleaning.
NOTE: Signage not supplied by Hatco. Sign dimensions are
31-15/16″ W (811 mm) x 6-1/4″ H (159 mm). Order custom
signs for Hatco equipment at www.hatcographics.com .
1. Remove the two front cover screws from the cabinet cover.
2. align the mounting holes on the sign holder with the holes
on the cabinet cover.
3. Insert the cover screws through the holes in the sign holder
and into the cabinet cover. Tighten securely.
Halogen Bulbs
Optional halogen bulbs (Hatco P/N 02.30.081.00) can be
ordered in place of the standard incandescent display light
bulbs.
WARNING