HASUTA HMF-300, Инструкция по эксплуатации

Страница: 6 / 16

7 8
How to use it Product Operation Guide
make sure the surface of the wire is okay, Do not insert or remove the plug
with a wet hand
This product uses only the DC110V-240V,
50/60Hz power supply.
Make sure your indoor voltage fits this
specification parameter.
● Turn on the power switch at the back of product
●Chose different program to proceed massage.
● Connect the DC adaptor to the socket.
to “I”, when the red light is on, the yellow light
on control panel blinks, the product is in standby
mode.
●Press on/off button, start the foot massage.
Product Operation Guide:
Auto program modes: Place
your foots in the product,
before pressing the switch
key on screen. When the
blue light is on is mode
1,Red light is on is
mode2,Green lights on is for
mode 3.program.
On/off : Start the foot
massage, turn off the foot
massage. When you start the
massage, the lights will flash.
Press it,green lishts on, the
massage function is turned
on,and start
vibration,automatic
program,heat function is
on.Press it again for close
massage function.
Under stand by mode,press
vibration for 3 seconds,it can
solely control vibration.3
modes of vibration
adjustment, Blue lights on
for mode 1. Red lights on for
mode 2. Green lights on for
mode 3. mode 3.
Vibration: Press on/off,It
will control vibration
function.Lights on,vibration
function on,Lights off,
vibration function is off.
Intensity: 3 levels of air-
compression intensity
adjustment, green lights on
for low level. Blue lights on
for media level. Red lights
on for strong level. Light off
for close function.
Heat : Press the button ， Red
lights on for heating
function. Lights off for close
heating function.
Note: 1, when you turn the vibration function keys to adjust
the intensity of the three levels of vibration.
2,under automatic massage function,intensity key is for
adjust the intensity of air-compression.
Heat Intensity
On/Off
Auto
Vibration