13
c) Adjustment of net height:
At first unscrew handwheels, adjust the height and then tighten handwheels again.
The net height has generally to be adjusted with released tension!
d) Tensioning of the net:
Use the flexible crank at the mechanical sliding device until
the necessary tension is achieved. Stick crank on the
universal joint.
Take care to turn the crank close to the upright to
avoid damages
of the universal joint!
During tensioning of the net the uprights deform to the
field centre. These deformations are no defects and
disappear when the tension is released.
e) Fixing of tensioning cords (if available-
depending of net)
:
Fix tensioning cords at both uprights to adjust the net. The lower cords can be fixed in
the lower eyes or tensioned around the uprights. The upper and middle cords are only
fixed around uprights’ profiles.
4. Storage of multiple use uprights:
Storage of uprights has to be effected horizontally on a board or on a special trolley. Take
care to tighten handwheels of sliding devices before using uprights again.
flexible
crank
hand-
wheel