11
Now screw 4 net hooks into the nuts M6. Adjust net hooks
(horizontally
– see picture) so that that later the net holding
rod can be fixed
.
Then stick into the groove at the opposite side of the upright 1
nut M8 and push it below the cap. Screw 1 composing stick
M8
into the nut facing to the upright’s bottom.
b) Mechanical uprigth: (upright with spindle mechanism)
Place upright with groove and guide roller facing upwards on a suitable surface to
avoid damages. Push 4 nuts M6 into the groove at the open end of the upright.
Spare the bottom of the upright (350 mm) as this part will later be inserted into the
ground socket. Now screw 4 net hooks into the nuts M6. Adjust net hooks
(horizontally
– see picture) so that that later the net holding rod can be fixed.
Turn the upright so the opposite groove faces upwards. Push from the top cap
support into the groove and fix it slightly with 1 grub screw DIN 553, M6 x 8 mm.
screw net hooks
horizontally
net hook