11
Remove screws, washers and nuts provided at the handlebar holders and stick
handlebar (with square tube ends) into both holders. Then stick washers on screws and
push screws through one of the three holes (according to the required length of
handlebar). Stick from the back washers, screw nuts and tighten them.
4. Operation, adjustment, color quantity and cleaning:
Mix colour (Haspo liquid marking colour for example) according to the producer’s
instruction. We recommend to place the marker at the requested position before filling
as marking starts with moving the marker.
Pour the colour in the tank. A brush adjusts
intensity and consumption of the colour. Move
the marker and turn the handwheel until the
requested quantity is applied.
Note: Tip the marker backwards if marking shall be stopped.
After having finished marking remove the
remaining colour. Unscrew drain screw and
collect the colour in a suitable bin. Clean tank
and wheels with water and dry them with a soft
cloth.
remove
screw, nut,
washer
turn handwheel to adjust
the quantity
drain screw
adjust length of the
handlebar as
required
