Hasler WJ 110, Руководство пользователя, Страница: 2 / 107

2
IJ40-0012-2
4127762B/B
11/24/2006
MODEM APPROVAL REQUIREMENTS
This equipment contains a modem which has been approved for
connection to analog public switched telephone networks . However,
due to differences between individual telephone networks provided
in different areas, the approval does not, of itself, give an
unconditional assurance of successful operation on every network
termination point.
In the event of problems, you should contact your equipment
supplier in the first instance.
INSTALLATION
The power plug on this equipment is intended to serve as the
device for isolation of the electrical supply. The equipment should
be installed in close proximity to an easily accessible grounded
power supply and analog telephone socket.
WARNING: FOR SAFETY THIS EQUIPMENT MUST BE
GROUNDED
The WJ 65, WJ 95 and WJ 110 Mailing Machines have been
designed to meet the safety requirements of UL1950. The peripheral
interfaces meet the SELV requirements of that standard, therefore
in order to maintain the level of safety provided by the WJ 65,
WJ 95 and WJ 110, the interface of any equipment connected to the
WJ 65, WJ 95 and WJ 110 interfaces must also meet the SELV
requirements of UL1950.
Caution, to reduce the risk of fire, use only No. 26 AWG or
larger telecommunication line cord.
No part of this document may be reproduced or transmitted in any
form or by means, electronic or mechanical, for any purpose
without the express written permission of Hasler Inc.
Copyright© Hasler 2004