Hasler HJ500, Руководство по эксплуатации

Страница: 20 / 40

12
Starting Up the HaslerJet 500
If the HaslerJet 500 has been sitting idle for a period of time, It is a good idea to Purge the printheads before
beginning to run a job. This can be done from the HaslerJet 500 LCD Display Panel. Press
MENU , then ON
LINE to put the HaslerJet 500 in the menu mode. Then using the + or - buttons scroll to PURGE: Then
press the ENTER button. Allow the HaslerJet 500 to run a few pieces then press ENTER again to stop the
purge. Check that the pattern run on the media is even, without any blank areas or white streaks. If the
pattern is OK, then return the HaslerJet to the standby mode by pressing the
MENU button. Anytime the
HaslerJet 500 sits idle for a while the purge routine should be run before running the job.
Printing a Test Print
Make sure that the HaslerJet 500 printer is properly connected to the computer and turned ON . Open the
“Control Panel” either from the desktop or from the icon in the layout editor. Click on the Load Job icon
and select the job you wish to run. Then click Load Job .
Once the job is loaded the first
record to be run will appear. Click
on the
Print Record button and
the window on the right will
appear. You have the choice of
either selecting the number of
prints that you wish to print (the
default is 1) or selecting
Unlimited , which will allow the
printer to run the same record until
you press the
Select key to stop the
feed.
When you have completed the
running the copies for setup, simply click on
GO to start printing the job.
NOTE: This feature may be used at anytime during the printing of your job to check setup or to rerun
lost records.
Printing the Job
Click on the GO button to begin printing the job. The HaslerJet 500 will begin by rendering the fonts and
logos then download them to the printer. Depending on the complexity of the page this process may take up
to a few minutes. Once a font or logo is rendered, the HaslerJet 500 can call it up from this folder for reuse
the next time a job that uses that particular font style or logo is run.
Monitoring the Job
The HaslerJet 500 can be stopped by pressing the SELECT key or by clicking on STOP in the Control Panel
software without affecting the job. The printer will resume printing at exactly the same point in the database
when it is restarted.
Printer Control Panel
When you first turn the printer ON , the light in the TEST PRINT key lights and the display becomes active. At
this point, the printer is ready to print if it is connected to your computer.
The printer control panel keys can be used to access various functions that help the operator control the printer.
These functions and their operation are as follows:
ENTER key
The ENTER key is used to start the printer printing under production situations. When the printer is placed in
any of the menu modes, the ENTER key is used to choose the options available.
TEST PRINT key