HASHIMA HP-450C, Инструкция по эксплуатации

Страница: 8 / 17

electric failure, put the T-typed wrench (an accessory ) on to the screw for
emergency use on the side of the main unit and turn it to the arrow marked
direction. before you’ll unload the finished material
Daily maintenance <<Pay attention to fear such accidents as burn and caught
–in.>>
Cleaning belts
Clean the belt while it is hot. Use the Hashima New Ace or the New Clean Spray
to clean the belt. In the case where you put the latter to use . pay attention not to
spray such electric parts as the warp prevention limit switch and others, resulting
in troubles. Moreover, don’t use the powders New Cleaning except when dirt is
remarkable. Wipe with sure the powders which have a character to be hardened
when it is cool. Apply the Hashima New Ace onto the belt for the prevention of
dirts.
Cleaning the cleaner
The cleaner is provided at the rear part of the machine. At the start of the
cleaning, don’t fail to pay attention so that the clean surface could make contact
with to belt. And observe it about twice a day to change the dirty surface if
necessary. The cleaner is to be removed when you push it to the manipulation
panel’s side. When you wind a new cloth. make it coincide with the rotary
direction of the belt and, then ,wind it ,not being caught in.