54
HEATING
4.1 Initial Operation
Please observe that during the first 2 to
3 firings a distinct odor will be experien-
ced.
4.2 Heating with wood
4.2.1 Closed operation
Lighting
It is important to pass through the ligh-
ting phase quickly since during the ligh-
ting or firing phase, higher emission
values may occur if mistakes are made
in regulating the stove. Therefore, we
would be grateful, for the sake of the
environment, if you would closely obser-
ve the following. The stove should
always be lit with wood. It is not sensible
to light the stove with briquettes.
Procedure
- Open the throttle flap entirely, if your
flue pipe has one
- Set control elements for wood
- Open fire box door
- Sweep remaining ash and any unbur-
ned charcoal into the middle
- Place screwed up newspaper, non-
coated cardboard or wood wool into
the middle of the firebox
- Place dry wood chippings around the
lighting material
- Place 3 - 4 small pieces of wood
around the outside
- Light the material at several points
- The fire box door should be left open
slightly during lighting to prevent
condensation on the glass
- Close the door when the wood is bur-
ning on all sides
- After a short time add 3 - 4 small logs
Position of control elements
- Position handle along the length of
the pipe
- Turn the fuel selector to the left (to
the mark „H“).
- Push shaking grate handle inwards
See brief operating instructions for
wood
Содержание FORUM
Страница 2: ...2 ...
