Hase Spezialräder TRETS Скачать руководство пользователя страница 7

Gearing

The Trets has a 7-speed derailleur 
gear system with a grip shifter. Your 
child can adapt easily to the traveled 
speed and pedal along actively with 
the adult. The gears can be changed 
during forward pedaling. The gear 
actually in use is displayed on the grip 
(see photograph).

Care of the gear system:
Occasionally oil the shift cable and the 
shifter. The chain and chain guide 
roller on the shifter must be cleaned 
when necessary and oiled lightly. Do 
not use a high pressure cleaner to 
clean the gear system as the pressure 
of the water drives the lubrication out 
of the bearings.

Gear display 

Gearing, flag

S P E Z I A L R Ä D E R

A S

E

We recommend using the flag delivered with the Trets. The 
Trets is a low-lying cycle and, therefore, bike and passenger

Flag

The borehole for holding the flag is on 
the top of the seat on the right (see 
photograph on the right). You can feel 
the entry with you finger through the 
seat cover material. Before inserting 
the flag, pierce the seat cover with a 
sharp blade or mandrel above the 
hole. The flagpole must then be 
inserted and pushed in as far as 
possible.

Borehole

Page 18   

                Stand  03.2003                                                                            

Содержание TRETS













Отзывы: